None SW1480BN Guide d'installation télécharger pdf (Page 9)

HOMEDEPOT.COM

Please contact 1-877-527-0313 for further assistance.

WARNING: Ensure you complete this step correctly and

follow all steps. Failure to correctly follow this step might

cause the fan to fall.

□ Remove one of the four screws (GG) on the mounting

bracket (C) and loosen, but do not remove, the other

three screws (GG).

□ Remove the motor assembly (D) from the J hook.

□ Lift and place the key holes (JJ) on the mounting plate

(D) over the three screws previously loosened on the

mounting bracket (C) and turn the mounting plate (D)

until it locks in place and no longer turns.

□ Secure by tightening the three screws previously

loosened and the screw (GG) previously removed.

Assembly — Hanging the Fan (continued)

Finishing the fan installation

Attaching the fan motor assembly

to the mounting bracket

□ Align the four large screwheads (MM) pre-locked on the fan

housing (H) to the key holes (KK) of the mounting bracket (C).

□ Turn the fan housing (H) at the right side and twist the

screwheads (MM) to the end of the slotted holes (LL) until they

lock in place and no longer turn.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Pas de commentaire

None SW1480BN Guide d'installation Page 9