None SW1480BN Guide d'installation télécharger pdf (Page 11)

HOMEDEPOT.COM

Please contact 1-877-527-0313 for further assistance.

Assembly — Installing the Light Kit

Finish the light kit assembly

and glass shades mounting

□ Disassemble the switch house cover (G) by removing

the three screws (HH) on the switch house (F).

□ Remove the three screws (HH) in the light kit assembly

(I). While holding the light kit assembly (I)under your fan,

snap together the wire connection plugs (NN).

□ Carefully push all wires back into the switch house (G),

then install the light kit assembly (I) onto the switch

house (G) with the three screws (HH) removed and

securely tighten all screws.

□ To install light kit glass shade (J), loosen the light kit

screws (II) and install the glass shade (J) to the light

kit (I). Secure by tightening the light kit screws (II)

previously loosened.

□ Install 4×40W A15C bulbs (K) (included).

□ Restore power and your light kit is ready for use.

□ Attach the fan pull chain fob (EE) to the chain on the

switch house (F), and attach the light kit pull chain fob

(FF) to the chain on the light kit assembly (I ).

1 2 ... 6 7 8 9 10 11 12 13 14 15

Pas de commentaire

None SW1480BN Guide d'installation Page 11