None BD101K-07800-BR-NL Guide d'installation télécharger pdf

IMPORTANT: BEFORE YOU BEGIN

IF INSTALLING DIRECTLY INTO A NON-CONCRETE WALL, DO NOT ATTEMPT TO INSTALL THE RAIL SOLELY TO THE

DRYWALL OR ANY WALL SURFACE AS THIS MAY NOT SUPPORT THE WEIGHT OF THE RAIL AND MOUNTED DOOR.

THE RAIL MUST BE INSTALLED ONTO A PIECE OF SOLID WOOD BLOCKING (SOLD SEPARATELY) USING MOUNTING

SCREWS (ALSO SOLD SEPARATELY). ENSURE THE SOLID WOOD BLOCKING IS SECURED INTO THE STRUCTURAL

SURFACE. USE A STUD FINDER WHERE NECESSARY TO LOCATE STUDS AND SECURE SAFELY. TYPICAL SOLID WOOD

BLOCKING SHOULD BE 81 3/4" (L) X 6" (H) x 1" (D).

NOTE, SEPARATE BOLTS ARE PROVIDED FOR 1 3/8" DOORS AND LONGER BOLTS PROVIDED FOR 1 3/4" DOORS. IF

INSTALLING WITH THE INTERNAL FLOOR-MOUNTED DOOR GUIDE, THE DOOR MUST BE MORTISED 1/4" WIDE X 3/4"

DEEP CENTRALLY. AN OPTIONAL WALL-MOUNTED DOOR GUIDE AND FLOOR MOUNTED DOOR GUIDE HAVE ALSO BEEN

PROVIDED FOR NON-MORTISED DOOR INSTALLATION.

BARN DOOR HARDWARE KIT

TOP OF DOOR STRAP

BD101K-07800

INSTALLATION GUIDE

Main Components

Tools Required

Tape Measure

Cordless Drill

Pencil

x1 Right Stopper

x1 Rail x5 Wall Spacer

x2 Anti-jump Block

x5 5/16 (8mm x 60mm)

Carriage Bolt

x5 5/16 (8mm x25mm)

Anchor

(Pre-mounted to

Carriage Bolt)

x5 5/16 (8mm x 90mm)

Wall Screw

x1 Left Stopper

x1 Internal

Floor-Mounted

Door Guide

x2 #8 (4.2mm x 25mm)

Floor Screws

x2 1/4 (6mm)

Floor Anchor

x1 Optional

Wall-Mounted

Door Guide

x2 Optional

Floor-Mounted

Door Guide

1/4" Mortise Router Head

Speed Square

Required for Floor-Mounted

Door Guide Installation

Allen Key LevelPhillips Screwdriver Wrench

x2 Top of Door Strap

1 2 3 4 5 6

BD101K-07800 1

Résumé du contenu

Page 1 - BD101K-07800

IMPORTANT: BEFORE YOU BEGINIF INSTALLING DIRECTLY INTO A NON-CONCRETE WALL, DO NOT ATTEMPT TO INSTALL THE RAIL SOLELY TO THEDRYWALL OR ANY WALL SURFAC

Page 2

BARN DOOR HARDWARE KIT TOP OF DOOR STRAPBD101K-07800INSTALLATION GUIDEStep 1. Door PreparationNote, a second optional wall-mounted door guide has also

Page 3

Step 4. CONCRETE Wall PreparationIF INSTALLING INTO DRYWALL – PLEASE PROCEED TO STEP 7. Position the rail by measuring up from the door height (H) +

Page 4

BARN DOOR HARDWARE KIT TOP OF DOOR STRAPBD101K-07800INSTALLATION GUIDEStep 7. DRYWALL Wall Preparation When installing into drywall, a piece of 81” x

Page 5

BARN DOOR HARDWARE KIT TOP OF DOOR STRAPBD101K-07800INSTALLATION GUIDEStep 10. Hanging the DoorPlace the assembled door onto the secured rail and tigh

Page 6

BARN DOOR HARDWARE KIT TOP OF DOOR STRAPBD101K-07800INSTALLATION GUIDEStep 13. OPTIONAL Floor-Mounted Door Guide Installation Line up close to the op